Renovating a Paint Stained Slate Floor in Hampton, Middlesex

It’s surprising how often I get asked to look at tiled floors stained with paint and other chemicals because of careless decorating work. Such was he reason that I was asked to renovate this Slate tiled floor that had been installed in the garden room of a house in Hampton, in the London Borough of Richmond upon Thames. On this occasion the customers decorators had not covered the floor properly prior to painting which led to spots of paint and a white haze in places where they had tried and failed to rub the emulsion off the stone floor.

Slate Tiled Floor Hampton Before Cleaning

I went over to take a look and could see that the floor would benefit from been given a thorough clean, spot treating the decorating issues in the process and then given a fresh coat of sealer to protect the floor going forward and bring out the character of the stone. Having given the customer a quote which was accepted we agreed a date for me to return and given the floor a new lease of life.

Slate Tiled Floor Hampton Before Cleaning

Cleaning a Dirty Slate Tiled Kitchen Floor

The correct way to restore a floor such as this is to first strip off any existing coatings such as old sealers and take the tile back to its original condition. To do this I sprayed on a dilution of Tile Doctor Remove and Go and left to dwell and soak into the old sealer and paint stains. Remove and Go is a stripper that as its name suggests is designed to be used on Tile, Stone and Grout. After ten minutes the product was worked into the slate tile and grout using a heavy duty rotary scrubbing machine. To help with the cleaning process, we also sprayed on Tile Doctor Pro-Clean which is our go to Tile and Grout cleaning product.

The solution soon turned into a slurry as the dirt, old sealers and stains were lifted out of the pores of the slate. To remove the soil the floor was rinsed with water and then extracted from the floor using a wet vacuum.

The floor was then inspected, and stubborn stains spot treated until I was happy with the condition of the tile and grout. The floor was given a final rinse to remove any trace of cleaning products and then dried as much as possible using the wet vacuum.

Sealing a Slate Tiled Kitchen Floor

I left the floor overnight to dry completely following the cleaning and returned the next day to finish the renovation. After testing for damp to ensure the floor was dry, two coats of Tile Doctor Colour Grow were applied to fully seal the floor. Colour Grow is a colour enhancing sealer that penetrates int the pores of the stone to protect it from within. It worked really well on the Black Slate and restored the contrast in the tile while giving it the deep black look that the customer was expecting. The fresh sealer has the added benefit of making the floor easier to clean in the future

Slate Tiled Floor Hampton During Sealing

The floor now looks completely revived and the sealer will help keep it looking that way for some time to come.

Slate Tiled Floor Hampton After Cleaning

 
 
Source: Slate Tile Cleaning and Sealing Service in Hampton, Middlesex

Ruined Slate Tiled Floor Fully Restored in Bexhill

The photos below show what can only be described as a botched installation of a black Slate tiled living room floor by a non-expert builder. It may not be immediately obvious what the problems were – but the property owner was pulling his hair out with the situation (having spent a small fortune) as the floor was incredibly dirty. He decided to call us in to take a closer look at what could be done to put his mind to rest.

Black Slate Tiled Floor Before Cleaning Bexhill Black Slate Tiled Floor Before Cleaning Bexhill

This property was located in Bexhill, a large seaside town on the South East coast that is known for its abundance of Edwardian and Victorian architecture.

We arrived at the property and, upon closer inspection, we could see that the floor was covered in unsightly marks. At first glance I thought it might be grout smears (aka grout haze) which is a fine powder that is meant to be polished off after tiling, but it was in fact excess grout that had been left on the tile and then to compound the problem sealed over. To make things worse the slate tiles had not been laid completely flat and there was a great amount of lippage between them. However, despite all the problems I was confident we could resolve the issues for the customer and we set a date to come back and do the work.

Restoring a Poorly Installed Black Slate Tiled Floor

On our return we set about covering the skirting boards with a thin plastic sheet to protect them from any splashing from cleaning products.

Black Slate Tiled Floor During Cleaning Bexhill

Once this was done work started on the restoration beginning with an application of Tile Doctor Acid Gel, which is a blend of phosphoric and hydrochloric acids that comes in a gel form that is easy to control. This is used to break down the existing sealer and – in combination with some diamond encrusted burnishing pads – to dissolve and grind away the excess grout which was marking the floor.

Black Slate Tiled Floor During Cleaning Bexhill

The floor was then rinsed with water and the soiled solution extracted using a wet vacuum. Following this the slate tiles were inspected and stubborn areas re-treated.

It’s worth noting we would not take this aggressive approach on acid-sensitive stone such as Marble, Limestone, Travertine and some types of Terrazzo. We would use a more neutral cleaning product, combined with the burnishing pads. Acidic products can cause etching on these sensitive types of stone, but thankfully Slate is hard-wearing and is compatible with Acid Gel.

Sealing a Black Slate Tiled Floor

The floor was left to dry completely over the course of two days. We then returned to apply a fresh seal to ensure the floor was be protected for the future.

First, we applied Tile Doctor Stone Oil, which is an impregnating, colour enhancing sealer. It’s designed for low porosity stone like Slate and does a remarkable job of restoring the dark tones in the stone. Once this had dried it was followed by a couple of coats of Tile Doctor Seal and Go which adds a high-quality and aesthetically pleasing sheen finish to the tile.

In the space of a few days, we were able to help the customer avert what initially seemed to be a crisis caused by amateur tiling. The customer was very relieved not to have to take a costly and drastic action like replacing the floor entirely. With the right products and cleaning methods, we were able to get these tiles looking the way they should have in the first place.

Black Slate Tiled Floor After Cleaning Bexhill Black Slate Tiled Floor After Cleaning Bexhill

 
 
Source: Slate Tile Cleaning and Restoration Service in Bexhill, East-Sussex

Deteriorated Slate Tiled Floor Rejuvinated in Southport

An unusual but attractive combination of semi riven black Slate with white Marble inserts had been installed in the hallway of this residence in the town of Southport. This floor had not been cleaned properly in some time, in fact the local Tile Shop had given the customer the incorrect tile cleaning product for the job which had slowly stripped the sealer off the tile leading to dirt becoming ingrained into the tile and making it difficult to clean which resulted in the deteriorated condition you see on the picture below:

Black Slate with White Marble Inserts Southport Before Cleaning

Cleaning Black Slate and Marble Inserts

The remedy was to give the floor a good deep clean and then reseal so I got to work and applied a medium dilution of Tile Doctor Pro-Clean onto the floor leaving it to soak in for fifteen minutes before working it in with a black scrubbing pad fitted to a rotary buffing machine. This process soon had the dirt running out of the floor and the soiled solution was removed using a wet vacuum. The process was repeated for stubborn area and this time the grout was scrubbed by hand using a stiff brush and more Pro-Clean. Pro-Clean is a multi-purpose alkaline based cleaning product that’s safe to use on Tile, Stone and Grout and given there was hardly any sealer left it wasn’t necessary to use a stronger dilution. Once I was happy with the floor it was washed down with more water to remove any trace of cleaning products and then the water removed using the wet vacuum and then left to dry overnight.

Sealing Black Slate and Marble Inserts

We have a number of sealing products suitable for Slate and Marble each one with a different effect but given then floor was predominately slate I decided opt for four coats of Tile Doctor Seal and Go which provides stain protection and leaves a nice low sheen finish.

Black Slate with White Marble Inserts Southport After Cleaning

Before leaving I let them know about Tile Doctor Neutral Clean which is a cleaning product that has a near neutral PH and is specially designed for cleaning sealed floors.
 
 
Source: Slate Tile Cleaning Services in Southport

Slate tile maintenance

This was a straightforward black slate tile clean and seal in a large kitchen of a house in Portsmouth, the tile and grout were in good physical condition and just needed of a deep clean.

Black Slate Floor Portsmouth Before Black Slate Floor Portsmouth Before

Cleaning Slate Tiled Floor

The first step was to give the tiles a really good clean using a dilution of Tile Doctor Pro-Clean which was left to dwell on the tile for a while before being scrubbed into the floor using a rotary machine fitted with a black pad. It was a large area so we worked in sections and used a stiff brush along the grout lines to get them clean.

The soiled cleaning solution was removed using a wet vacuum before washing down the area thoroughly with clean water; any stubborn marks were revisited with a repeat of the same process until we were happy the tiles were clean.

Black Slate Floor Portsmouth Cleaning Black Slate Floor Portsmouth Cleaning

Sealing Black Slate Floor Tiles

We left the floor to dry overnight and came back the next day to seal it using Tile Doctor Seal and Go, a highly recommended sealer for Slate which provides good stain protection with a low sheen finish, slate is quite porous and it took five coats before it was fully sealed.

Black Slate Floor Finished Black Slate Floor Finished

The black slate looked amazing when we had finished, the customer was certainly happy with the result.
 
 
Source: Cleaning and sealing Black Slate floor tiles in Hampshire

Slate Tile Cleaning in Staffordshire

This slate tiled floor was installed in a Kitchen in Burton on Trent, Staffordshire. The owner of the house felt it was time to get it cleaned and re-sealed so gave us a call.

Cleaning black slate floor tiles

We set about cleaning the kitchen floor with a mixture of Tile Doctor Pro-Clean mixed 50/50 with Tile Doctor Nano-tech Ultraclean which was worked into the pores of the slate tile using a slow speed rotary machine fitted with a Polyscrub scrubbing brush which can reach down into grouting as well as scrubbing the floor. I then used a wet vacuum to remove the resultant soiled solution before rinsing the floor down twice with cold water, this also neutralises the floor prior to sealing.

Slate Floor Before Cleaning

Sealing Slate floor tiles

I left the floor overnight to dry then came back next day and used a damp test meter to verify the floor was dry and ready for sealing. Once happy I proceed to apply three coats of Tile Doctor Seal & Go which as you can see from the photograph below has really brought out the natural colours in the slate. I used a water test after the third coat was dry to see if the water would form bubble on the surface thus indicating it was dry, which it did thereby indicating the floor was fully sealed.

Slate Floor After Cleaning

Overall the job took two days and I’m happy report the customer was amazed with the outcome and very pleased.
 
 
Source: Professional Slate Tile Cleaning in Staffordshire