Renovating a Limescale Stained Slate Shower in Oxshott, West-Surrey

In the south east of England, we suffer from hard water which as many of you have experienced can calcify on our showers leaving white limescale staining. Without fitting a water softener this limescale causes a problem around the home, particularly when the tiles are dark.

A good example of this problem was this large dark grey slate tiled shower at a house in Oxshott where the limescale had completely ruined the look of the black slate. The problem was most evident on the slate tiles on the floor but had also stained the slate split face slate tiles on the shower wall.

Slate Tiled Bathroom Before Renovation Oxshot

Oxshott is a village in Surrey between Leatherhead and Esher, a survey in 2010 by the Daily Telegraph asserted it was “the village with most footballers” in England and mentioned other celebrities who chose to live in the village probably because Chelsea Football Club have their main training ground in nearby Stoke D’Abernon; It is a beautiful area and is no surprise it is also known as ‘the most expensive village in England’.

The wet room was not that old, but due to the limescale staining was prematurely in need of attention. We often get calls from customers where they have use supermarket products to treat hard water stains, however these products are generally acidic, and this can make the problem worse. I would recommend you always read the back of the bottle before to check it is safe to use on natural stone before applying.

After inspecting the shower, I agreed with the client the best course of action, agreed a price and booked the job in for a later date.

Limescale Stained Slate Wet Room Cleaning

I returned on the agreed date and started work by first removing the existing sealer by applying Tile Doctor Remove and Go which is a multi-purpose stripper that’s formulated for use on natural stone. The product also draws out ingrained stains and removes heavy grease build-up. For best results spray the product onto the tile and then leave for it to soak in and get to work breaking down the coatings etc. After ten minutes the product is scrubbed into the stone which in this case meant by hand. The soiled solution can then be rinsed off the tiles with water. The grout was then cleaned by hand scrubbing in a strong dilution of Tile Doctor Pro-Clean followed by more rinsing.

The final part of preparation was to remove the limescale. This was done with a small handheld diamond block and a wire brush. The block is great for smoothing down all sorts of issues and being small it can get into tight areas. I then dried the whole room with an industrial blower. Slate cannot be sealed effectively when damp as it won’t cure properly. The blower is noisy but best in this situation and is very effective when a fast dry is needed.

Sealing a Slate Tiled Bathroom in Oxshott

After lunch I checked the area was nice and dry by testing the moisture content. I then sealed the whole area, wall and floor with Tile Doctor Colour Grow. Colour Grow, is a colour intensifying sealer that provides durable surface protection as well as allowing the surface to breath and enhance colour. For this project it darkened the tiles nicely and will provide protection from staining, making them much easier for the client to maintain moving forward.

The client was very happy with the lovely result. The bathroom looked clean and fresh again, now it is just a case of trying to keep on top of the limescale.

Slate Tiled Bathroom After Renovation Oxshot

 

Source: Slate Tile Cleaning and Renovation Service in Oxshott, West-Surrey

Builds Clean for New Slate Floor at Farnham Barn Conversion

Converting a barn into a property can be an exciting project, but it certainly doesn’t come without a range of challenges. If done correctly, they can look amazing and are well worth the effort.

A recent customer of mine had spent the last six months converting a barn into a residential property in the West Surrey town of Farnham. While the project had been a big success, the house had been subjected to high traffic from dozens of carpenters, electricians and builders. This had taken its toll on the newly installed Slate tiled floor – so the property owner asked me to restore it to its peak condition to complete the conversion once and for all.

Slate Tiled Floor Before Cleaning Farnham

Before accepting the job, I strongly advised the customer that I should be the last workman out of the door. In my experience few tradesmen are known to take care of other peoples work and any further work being done in the property could potentially spoil the appearance of the Slate tiles.

Slate Tiled Floor Before Cleaning Farnham

Cleaning a Slate Tiled Floor

The customer was happy for me to proceed, so on the agreed date I returned and started the work by laying down a strong dilution of Tile Doctor Pro-Clean across the floor. Pro-Clean is an alkaline-based cleaner which breaks down all manner of dirt and grime.

This was a large area of tiles, so I worked on individual sections of 3m2, first soaking the Slate in Pro-Clean and then waiting ten minutes for it to soak in and then following with a nylon black scrubbing pad fitted to a 17-inch rotary buffing machine to work the cleaning product into the stone. The tiles immediately came up looking much cleaner. Any excess water and chemical slurry was vacuumed up promptly with a wet vacuum.

The tiler had done a good job of laying the floor and removing any excess grout as normally my next step at this point would be to give the floor an acid wash, but it wasn’t necessary.

Once the tiles had been cleaned to the best of my abilities and given a thorough rinse, I left the property for 48 hours to allow any water that had seeped into the tiles to evaporate. This is important as excess moisture problems can prevent the tiles from being sealed correctly.

Sealing a Slate Tiled Floor

On returning to the property a couple of days later, I swept away any bits of dust and debris and then proceeded to seal the tiles with Tile Doctor Colour Grow.

Slate Tiled Floor After Cleaning Farnham

This impregnating, colour-intensifying sealer enhanced the stunning natural brown, gold and orange shades in the stone. Two coats of the sealer were applied to achieve a brilliant natural-look finish and robust protection against future wear and tear.
Restoring the appearance of these Slate tiles put the finishing touches on this fantastic barn conversion. Needless to say, the customer was very pleased with the results.

Slate Tiled Floor After Cleaning Farnham

 
 
Source: Slate Floor Cleaning and Sealing Service in West Surrey

Dealing with Scratched Slate Floor Tiles in a Surrey Kitchen

This property owner in Weybridge recently had a new fridge delivered by a well-known electrical retailer that has an unusual policy of not protecting its customers’ floors when installing heavy appliances. Predictably, the lack of care and consideration resulted in multiple unsightly scratches being left on the fantastic Slate tiled floor, mostly notably in front of the dishwasher, which was also newly installed.

Understandably, the property owner was not best pleased. He was keen to have the situation remedied as soon as possible. At Tile Doctor, we not only provide tile cleaning services but we also have the experience and equipment to hand all sorts of related issues including the restoration of scratched tiles. Happy to help. I travelled over to Weybridge to address the problem.

Scratched Slate Floor Tiles Before Cleaning Weybridge

Repairing and Sealing a Damaged Slate Tiled Kitchen Floor

The surface of the stone was damaged and the only way to repair it without the repair standing out was to strip and polish the whole floor. I therefore began the restoration by stripping the whole floor of its old sealer. The customer had marked all the deep scratches he wanted to have removed with sticky notes. I explained to him that burnishing, a type of polishing carried out using diamond encrusted handheld blocks in combination with a little water, would be perfect for this job.

The process of burnishing essentially grinds away the damaged layer and then re-polishes the stone, the process would remove the scratches and rebuild the shine. It involves the application of different grades of pads from coarse to extra fine and a little water to lubricate the process followed by a rinse with more water in-between each pad to remove the slurry generated by the process. After burnishing the floor is left polished but damp, however to save time I able to speed dry the whole floor using a powerful industrial air mover.

Once the floor was dry the final task was to re-seal the tiles. I did this using a couple of coats of Tile Doctor Colour Grow, a colour intensifying, impregnating sealer which soaks into the pores of the stone protecting it from within against ingrained dirt and stains for many years to come.

Scratched Slate Floor Tiles After Cleaning Weybridge

The customer was very satisfied with the service provided and left the following comment on the Tile Doctor feedback system:

“Great advice, open, honest and helpful. Turned up on time, explained the job well and it looks great. Very happy with the process and the finished results.”
 
 
Source: Slate Tile Cleaning and Restoration Service in Surrey