Tag Archives: east sussex

Revamping Dirty Slate Tiles

Posted on by

The photographs below are from a property in the small village of Mayfield, located within the High Weald civil parish of Mayfield and Five Ashes in East Sussex. The village is perhaps best known for its annual carnival and torchlight procession however on this occasion I was there to revamp the Slate tiled kitchen floor. The tiles had been left worse for wear by the previous occupants where years of children and mucky dogs had taken its toll on the slate.

Slate floor before cleaning in Mayfield Slate floor before cleaning in Mayfield

Cleaning a Slate tiled floor

Whilst I would normally utilise my buffing machine with a black buffing pad as part of the cleaning process for natural stone tiles, I was unable to do so in this case as the Slate tiles in the kitchen were riven which would of cut into and potentially shredded the pad.

As a result, I had to clean the floor by hand. I did this using a solution of one part Tile Doctor Pro-Clean to five parts clean water, which I worked into the tiles with a deck brush, followed by a hard brush. The solution needed will vary in accordance to the level of soil build-up on the floor. In this case, the soil build-up was light enough to use quite a diluted solution, but in a case where a floor is very heavily soiled I would recommend using a more concentrated solution of one part Pro-Clean to two parts water.

After a period of scrubbing with the hard brush, I sucked up the muck that had been removed from the surface with a wet-vac machine. I then continued with the cleaning process for several hours, before once again using the wet-vac machine up any excess moisture left by the cleaning solution. I left for a period of two days to allow the floor to dry completely before I returned to seal the floor. I instructed my client to keep the floor completely dry because any excess moisture would potentially impact negatively on the performance of the sealer.

Sealing a Slate tiled floor

To seal the floor I used Tile Doctor Colour Grow, a colour intensifying sealer which gets into the pores of the stone protecting it from within. In this case I applied two coats of Colour Grow to really bring out the range of fantastic natural colours and shades in the Slate, whilst also providing durable surface protection for this high-traffic kitchen area.

Slate floor after cleaning in Mayfield Slate floor after cleaning in Mayfield

My client was very impressed with the results. I hope she enjoys this brilliant feature of her new home, now full of life and colour once again.
 
 
Source: Professional Tile, Stone and Grout Cleaning service in East Sussex

Cleaning Very Dirty Riven Slate Kitchen Tiles

Posted on by

I was recently contacted by a client who had just moved into a house in Crowborough, a town in East Sussex which by the way was once home to Sir Arthur Conan Doyle, the author of the Sherlock Holmes novels and short stories. The riven Slate tiled floor in the kitchen had trapped bits of dirt and also food which had become ingrained in the tile. Needless to say, the new homeowner wanted to give the kitchen floor a thorough clean. However, she had tried every cleaning product she could find in the supermarket, but to no avail. Struggling to find a solution she sought out professional assistance and naturally I was happy to help.

Slate floor before cleaning Crowborough

Cleaning a Slate tiled floor

My first task was to mix up a strong solution of Tile Doctor Pro-Clean. The product was only slightly diluted with water, since the floor was quite heavily soiled and a higher concentration of Pro-Clean was needed to help remove several layers of dirt and food waste. Once applied to the floor, the solution was left to dwell for roughly five minutes before I began to work it into the stone with a deck brush. I did the best I could here to clean the floor without using my buffing machine as, since the floor was riven, my black buffing pad would have been ruined by the ridges.

Making up for the lack of a buffing machine, I made sure to scrub the floor with Pro-Clean for several hours to remove as much grime as possible. One the cleaning was finally completed I rinsed the floor several times with clean, hot water. I then used a wet-dry vac machine to remove any excess moisture to clear the floor for sealing when I returned 48 hours later. Upon leaving, I left my client with instructions to avoid spilling anything on the floor as, again, any liquid left on the surface might affect the performance of the sealer.

Slate floor during cleaning Crowborough

Sealing a Slate tiled floor

After a period of two days, I returned to commence the sealing. My choice of sealer was Tile Doctor Seal & Go, which is suitable for use on internal, unsealed surfaces such as Slate, textured Quarry, Victorian tile, and others. Seal and Go is also a water based sealer so you there’s very little smell given off whilst it dries compares to solvent based sealers. In this case, the client did not want the surface of the floor to be too shiny, so I only used two coatings of Seal & Go, whereas for a shinier result I would have used a few more.

Slate floor after cleaning Crowborough

My client was exceptionally pleased with the results, which had not only cleaned the floor but brought out the beautiful colours in the stone that had once been hidden under several layers of muck.

Slate floor after cleaning Crowborough

 
 
Source: Professional Tile, Stone and Grout Cleaning service in Crowborough

Maintaining Slate Floor Tiles

Posted on by

This customer from Chelwood Gate which is a small village south of East Grinstead contacted me asking for the Slate tiles in their kitchen, utility room and living area to be cleaned and sealed. It was quite a large area, approximately 70sq meters.

Slate Tiled Floor Chelwood Gate Before Cleaning Slate Tiled Floor Chelwood Gate Before Cleaning

Deep Cleaning a large Slate Tiled Floor

Once we had cleared the large sofas and fridge freezer from the room I got to work cleaning and stripping the floor using a strong dilution of Tile Doctor Pro-Clean. I was slightly concerned by the large ridges on the tiles but made a start with the buffer fitted with a black scrubbing pad. Straight away the pad was shredded on the ridges so it became clear the floor would have to be completed manually using a deck brush and elbow grease. Once the floor was clean and stripped of any remaining sealer I gave it a thorough wash down to remove any cleaning product and extracted as much water as possible with a wet vacuum Luckily the room was well ventilated with several exits and large doors which aided the drying process.

Slate Tiled Floor Chelwood Gate During Cleaning

Sealing Black Slate Floor Tiles

After two days I returned to a dried out floor which was ready for sealing. We have a number of different sealers available; each one has a different effect. After discussing this with the customer they requested a shiny surface with improved colouring, so for the next five hours I applied four coats of Tile Doctor Seal and Go which is a water based sealer that gives a nice shine which matched their needs.

Slate Tiled Floor Chelwood Gate After Sealing Slate Tiled Floor Chelwood Gate After Sealing

You can see from the pictures the difference and amazing before and after result. We were unable to move one of the freezers in the utility room so I left the customer with a small bottle of Seal and Go to apply himself once the floor had dried enough to move the unit without scratching the sealer.
 
 
Source: Tile, Stone and Grout Cleaning Service in Sussex

Dealing with Limescale on Slate

Posted on by

Recently we were asked to resolve an unusual problem with Limescale deposits on Black Slate floor tiles installed in a WC at a house in Hove on the East Sussex coast. You can see from the photograph below how Limescale has left an unsightly white haze and water marks on the surface of the slate tile.

Black Slate Tiles in Hove Before

Cleaning Limescale from a Slate Tiled Floor

The first step was to remove the Limescale and any other sealer products from the floor using a strong dilution of Tile Doctor Pro-Clean scrubbed into the floor using a rotary machine fitted with a black pad, we also used a stiff brush along the grout lines and in those hard to reach areas around the toilet. The floor was then rinsed thoroughly with clean water and any stubborn areas revisited with a repeat of the same process until we were happy the tiles were clean. Had the Limescale proved harder to shift we would applied a stronger product such as Tile Doctor Grout Clean-Up which can remove mineral deposits.

Sealing Black Slate Floor Tiles

We left the floor to dry overnight and came back the next day to seal it using Tile Doctor Seal and Go, a highly recommended sealer for Slate which provides good stain protection with a low sheen finish, slate is quite porous and it took five coats before it was fully sealed.

Black Slate Tiles in Hove After

I think you will agree the slate tiled floor looks transformed as well as being much easier to clean.
 
 
Source: Cleaning and sealing Slate floor tiles in East Sussex